Filter
Top Products
Enter your choice:
5. Enter 1 to select Install software into a new area. You see
the following prompt:
You have chosen to establish a new remote dataless environment.
Enter the device special file name or the path of the directory where
the software is located (for example, /mnt/ALPHA/BASE):
6. Enter the software location, for example: /mnt/ALPHA/BASE.
• If your distribution media is CD
−ROM mounted on /mnt, the
directory where the software is located is /mnt/ALPHA/BASE.
• Enter a device specific file name only for magnetic tape media.
The dmu utility lists the mandatory and optional software subsets you
can install.
The following subsets must be installed in the DMS environment:
• Additional Networking Services
• Dataless Management Services
7. Select the subsets that you want to extract; the dmu utility displays your
list for confirmation. For example:
The following subsets are mandatory and will be installed
automatically unless you choose to exit without installing
any subsets:
.
.
.
{mandatory subset list}
.
.
.
Optional subsets are listed below. There may be more optional
subsets than can be presented on a single screen. If this is
the case, you can choose subsets screen by screen, or all at
once on the last screen. All of the choices you make will be
collected for your confirmation before any subsets are installed.
.
.
.
{optional subset list}
.
.
.
Or you may choose one of the following options:
94) ALL mandatory and all optional subsets
95) MANDATORY subsets only
96) CANCEL selections and redisplay menus
97) EXIT without extracting any subsets
Enter your choices or press RETURN to redisplay menus.
Choices (for example, 1 2 4-6):
94
The following subsets will be loaded:
.
.
.
{selected subset list - all mandatory & optional in this example}
11–4 Setting Up a DMS Environment