Filter
Top Products
This example uses a CD-ROM drive that is unit 4 and specifies
/mnt as the mount point.
If your drive is a different unit, substitute the correct device name. The
mount point does not have to be /mnt.
See Section 1.3 if you do not know the CD-ROM drive’s unit number.
____________________ Note _____________________
You can use a Network File System (NFS) mount point to
install software from a Remote Installation Services (RIS)
area or Operating System Volume 1 CD-ROM from another
processor.
See Section 4.5 for more information about using an NFS
mounted RIS area.
3. Enter /usr/sbin/dmu to start the dmu utility. You see the DMU Main
Menu:
*** DMU Main Menu ***
Choices without key letters are not available.
) ADD a client
) CONFIGURE software environments
) DELETE software environments
i) INSTALL software environments
) LIST registered clients
) MODIFY a client
) REMOVE a client
) SHOW software environments
x) EXIT
Enter your choice:
If this is the first time you have accessed dmu, there are no DMS
software environments installed. The only option you have is to install
software into an environment or to exit from the utility.
4. Enter i to select INSTALL software environments. You see the
DMS Software Installation Menu:
DMU Software Installation Menu:
1) Install software into a new area
2) Add software to an existing area
3) Perform configuration phase on an existing area
4) Return to previous menu
Setting Up a DMS Environment 11–3