Compaq TRU64 Washer/Dryer User Manual


 
DMS Information
The name of the dataless environment to which this client
Network
The client’s network interface type.
ZK-1520U-AI
This worksheet is used for recording the information you need to know when
adding a client to a DMS environment using the menu
option. If you are adding multiple clients, you must prepare a separate sheet
for each client. Fill in the client’s system name (host name) on the next line.
Registration Information for DMS Client
The client’s Ethernet or FDDI hardware address in the form
of six two-character groups separated by minus signs.
For example, 08-00-2f-03-f5-08
For example, ln0 or tu0, etc.
The client’s subnet mask.
For example, 255.255.255.0
will be added. For example,
/var/adm/dms/dms .alphaN
The name of the area.
The client’s swap device and partition.
The kernel build type (Full, Partial,
/clients
For example,
For example, /dev/disk/dsk0b
or None)
ADD a client
The client’s swap device type.
For example, RZ26
/clients/
hostname
The client’s route address.
(gateway FROM the client TO the server)
For example, 16.69.144.199
The route address is only required if the server and client are on different networks.
DMS Client Setup Worksheet
DMS Worksheets B–4