Filter
Top Products
Enter one or more choices as a space-separated list
(for example, 1 2 3) or "all" for all products:
5. Enter the number of the product you want to delete, for example: 1.You
see a prompt similar to the following:
You chose the following products:
1 ’Product 03’
Is that correct? (y/n) [y]:
6. Enter y to confirm your selection.
RIS does not keep empty RIS areas. If there is only one product in the
RIS area you selected, the ris utility verifies your intentions.
a. You see a prompt similar to the following:
After this deletion, the area /usr/var/adm/ris/ris1.alpha will be empty.
The following clients are registered for /usr/var/adm/ris/ris1.alpha:
client02
This procedure will remove /usr/var/adm/ris/ris1.alpha altogether and
remove all clients registered to it. Do you wish to continue? (y/n) [n]:
b. Enter y if you want to delete the product, the RIS area, and all
clients registered to the RIS area.
You see the RIS Utility Main Menu.
6.9 Correcting RIS Gateways File Entries
The /var/adm/ris/gateways file contains information about the address
of the gateway between the client system and the RIS server. When you
register a new client (Section 6.2), the ris utility queries this file to
determine if a gateway is already specified for the client’s network subnet. If
not, you are prompted to supply the IP address of the gateway.
If you enter the gateway address incorrectly, log in as root (or
use the su command to gain superuser privileges) and edit the
/var/adm/ris/gateways file to correct the entry. Entries in the gateways
file have the following format:
subnet_addr:gateway_addr
Managing RIS Clients and Environments 6–13