Compaq TRU64 Washer/Dryer User Manual


 
RIS Software Installation Menu:
1) Install software into a new area
2) Add software into an existing area
3) Return to previous menu
Enter your choice:
4. Enter 2 to select Add software into an existing area. You see
the following prompt, including all available RIS environments:
You have chosen to add a product to an existing environment.
Select the remote installation environment:
1) /var/adm/ris/ris1.alpha
Tru64 UNIX V5.1A Operating System (Rev nnn )
Enter your choice or press RETURN to quit:
5. Enter 1 (in this example) to specify the RIS environment where you will
add the hardware product kit. You see the following prompt:
Enter the device special file name or the path of the directory where
the software is located (for example, /mnt/ALPHA/BASE):
6. Enter the location of the hardware product kit you are adding, for
example: /HWKIT/MYVGA. You see the following prompt:
The kit you have specified has been identified as a kernel kit.
This type of kit may contain software which is needed during the booting of
the kernel for the installation due to required hardware support. If you need
to add this kit to the base, select the option to integrate the kit. You may
otherwise choose to add this kit to the RIS area as a separate product.
1) Integrate with Base product and include product
2) Include as separate product
3) Return to Main Menu
Enter your choice: [1]:
7. Select 1 to integrate the software with the base product. You see the
following prompt:
Please select one of the following products to add the kit to.
1 Tru64 UNIX V5.1A Operating System (Rev nnn)
Enter your selection or <return> to quit:
8. Select 1 (in this example) to select the base product where you will
integrate the hardware product kit.
4–8 Setting Up a RIS Area