Compaq TRU64 Washer/Dryer User Manual


 
9. Select the subsets that you want to extract; the dmu utility displays your
list for confirmation. For example:
The following subsets are mandatory and will be installed
automatically unless you choose to exit without installing
any subsets:
.
.
.
{mandatory subset list}
.
.
.
Optional subsets are listed below. There may be more optional
subsets than can be presented on a single screen. If this is
the case, you can choose subsets screen by screen, or all at
once on the last screen. All of the choices you make will be
collected for your confirmation before any subsets are installed.
.
.
.
{optional subset list}
.
.
.
Or you may choose one of the following options:
24) ALL mandatory and all optional subsets
25) MANDATORY subsets only
26) CANCEL selections and redisplay menus
27) EXIT without extracting any subsets
Enter your choices or press RETURN to redisplay menus.
Choices (for example, 1 2 4-6):
24
The following subsets will be loaded:
.
.
.
{selected subset list - all mandatory & optional in this example}
.
.
.
Are these the subsets that should be loaded (y/n) ?
If you enter y, the dmu utility loads the subsets. If you enter n, the list
of subsets is displayed again and you can restart your selection process.
The dmu utility installs the software subsets that you selected. This
can take an hour or more.
After the dmu utility installs the software, you see the DMU Main Menu.
10. Follow the instructions in Section 12.4 to delete the DMS clients
registered to the DMS area where you installed the software.
11. Follow the instructions in Section 11.4.2 to reconfigure the DMS area
where you installed the software.
12. Follow the instructions in Section 12.2 to add the DMS clients deleted
in the previous step to the DMS area where you installed the software.
When you remove and add clients to the reconfigured environment,
customized information in the root (/) directory is lost.
11–8 Setting Up a DMS Environment