![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/f1/ff100a0f-a2e3-4620-bb04-842866a75508/ff100a0f-a2e3-4620-bb04-842866a75508-bg3a.png)
2-26 Radio PC Card Configuration
2325 Reference Guide Revision B 2325A137REFGD
10. If you want to include commands to be executed in the
AUTOEXEC.BAT
file, select the AUTOEXEC.BAT button. Enter
the commands, and save the revised file before exiting from the text
editor.
Note: Verify that the drive and directories of any drivers
loaded in the AUTOEXEC.BAT file are correct. The
default PX_IPX.CFG file assumes these drivers will
go to a specific location on the 2325. If you change
the destination directory on the 2325 for these files, be
sure to change them here, too. The file that you
selected as the main application will automatically be
appended to the AUTOEXEC.BAT file before it is
downloaded to the 2325.
11. If you want to make changes to the CONFIG.SYS
file, select the
CONFIG.SYS button.
Note: Certain default configuration parameters and card
and socket services drivers will automatically be
included at the beginning of the CONFIG.SYS file
before it is downloaded to the 2325.
12. Select the Done button in the File Configuration window to return
to the Custom Configuration menu.
13. Modify your program settings and communications settings, if
necessary.
14. Select the Download button in the Custom Configuration menu to
install the IPX/SPX protocol stack on the 2325.
15. Reboot the 2325 when the download is completed.