2-2 Programming the Laser Triggers
2325 Reference Guide Revision B 2325A137REFGD
To rotate the laser module, complete the following steps:
1. Unscrew the screw that secures the module to the main part of the
2325. The screw will come loose but will not come out of the laser
module. Do not try to force it out.
2. Gently lift the laser module away from the top of the main part of
the 2325. The module will not completely separate from the rest of
the 2325. Do not try to force the units apart.
3. Swivel the module around until the laser window faces the opposite
direction. The module can rotate in only one direction. Do not try to
force it the other way.
4. Press the laser module back into the main part of the 2325, and
tighten the screw.
Note: After changing the laser module’s orientation, you may want to
swap the operations of the triggers. (See the next section
“Programming the Laser Triggers.”)
Programming the Laser Triggers
Normally, the left trigger operates the laser or another barcode reader
attached to the 2325, and the right trigger toggles the unit in and out of
Function mode. You can reprogram one or both of the laser triggers to
act as equivalents, or “aliases,” of keypad keys.
To turn a trigger into an alias for a keypad key:
First, hold down the [FN] key and press the [SWP] key. The program-
trigger icon should appear in the display. Press the trigger that you want
to change, and then press the key that you want to assign to the trigger.
For example, to turn the right trigger into an alias for the [ENTER] key,
hold down the [FN] key and press the [SWP] key to enter program-
trigger mode. Then press and release the right trigger, and press the
[ENTER] key. The right trigger will now work as a second [ENTER]
key.
To change a reassigned trigger back to a laser trigger, put the 2325 into
program-trigger mode and press the trigger twice.
