Vehicle Mounted DC Single Dock 7-17
2325A137REFGD Revision B 2325 Reference Guide
DC Single Dock Vehicle Wiring and Mounting Instruction
Introduction
The DC Single dock is intended for mounting in typical over the road
vehicles such as step vans or semi tractors. Because of the variety of
vehicle configurations and personal driver preferences, no one mounting
configuration can suit all applications.
LXE does offer a vehicle mounting bracket that provides vibration
isolation, but in many cases the user may want to provide their own
mounting hardware. Off the shelf cell phone mounting equipment or
custom mounting brackets could be used.
The mounting instructions that follow show the use of the LXE bracket
and the mounting hole pattern to be used if a custom mount is to be used.
Before Installation
Begins . . .
Verify you have the following DC Single dock components:
Figure 7-7 Singledock Components
Note: Hardware and tools needed for attaching the vehicle mounting
bracket to the vehicle are not supplied by LXE.
