2325A137REFGD Revision B 2325 Reference Guide
Chapter 7
The Docking Stations
Introduction
This chapter is intended for use by system administrators and advanced
users who need to modify the 4-Slot Dock’s factory-configuration
settings.
LXE offers three powered docking stations for the 2325 – a stationary
single dock that holds one 2325, a vehicle mounted single dock that
holds one 2325 and a four slot dock that holds from one to four 2325s.
The powered docking stations have two primary uses:
• Recharge the 2325 NiMH battery pack(s) and lithium backup
batteries.
• Provide a connection for serial communications between the
2325(s) and the host computer or another serial device, such as
a printer or modem.
All powered docking stations require an AC/DC power source. The four
slot docking stations can be daisy chained together. The station at the
end of the chain must be cabled to the host.
The non-powered vehicle mount docking station is a 2325 retention
device only.
For basic information about the Vehicle Mount Holder, Single Slot
and the 4-Slot Dock, see the “2325 Docking Station Installation and
Operator’s Guide”.
If the 2325 contains non-rechargeable batteries, do not
connect the power supply to the dock.
