A SERVICE OF

logo

Open as PDF
next previous
Transferring Files 2-17
2325A137REFGD Revision B 2325 Reference Guide
An Example
To transfer a file named MYFILE from a PC to a 2325 using Xmodem
protocol, you could use the following lines.
On the PC: xfer myfile. This command causes the computer to
send the specified file using XFER’s default settings.
On the 2325: xfer /r myfile. This command causes the 2325 to
receive the specified file transmitted from the PC.
Note: For more information about XFER, including Zmodem options,
see Chapter 5 “Using XFER.”