5-4 Syntax and Parameters
2325 Reference Guide Revision B 2325A137REFGD
Option Description Default
Xmodem Zmodem
O# Overwrites an existing file with a new file having
the same name. Replace the # symbol with the
desired setting:
1 = Overwrite if source is longer or newer
(Zmodem only)
2 = Overwrite if CRCs don’t match (Zmodem
only)
3 = Append to existing file (Zmodem only)
4 = Always overwrite
5 = Overwrite if source is newer (Zmodem only)
6 = Overwrite if dates or lengths don’t match
(Zmodem only)
7 = Never overwrite
7 7
Q Toggles quiet mode on and off. In quiet mode,
only the filename and a “Transmitting...” or
“Receiving...” message is displayed. When quiet
mode is off, additional information is displayed.
Each use of this option reverses the quiet-mode
state.
Off Off
R Receives the specified file or files. Off On if no
file is
specified
S# (Zmodem only) Specifies how paths and names
should be handled when sending files. Replace
the # symbol with the desired setting:
0 = Strip paths
1 = Send paths
2 = Send new paths/filenames
N/A 0
T Transmits the specified file or files. On On if file
is
specified
W# Window size (Zmodem only):
x = Packet size, in bytes
0 = Streaming
N/A 0
X Uses Xmodem protocol for the transfer.
Z Uses Zmodem protocol for the transfer.
