7-18 Vehicle Mounted DC Single Dock
2325 Reference Guide Revision B 2325A137REFGD
Quick Start
1. Assemble mounting bracket.
2. Install Mounting Bracket on a stable, flat surface. Use the LXE
Vehicle Mounting Bracket or an equivalent mounting assembly.
3. Insert the 2325 in the DC Singledock Bracket Assembly.
4. Connect power source to the Singledock.
5. Dock Power LED illuminates.
6. Turn the 2325 on.
7. You are ready to begin standalone operation.
Vehicle 12VDC
Connection
Important
Equipment is designed to use 11 to 16.5 volt power source
only.
The DC Singledock is designed for use with any automotive DC power
source within the range of 11 V to 16.5 V.
It is recommended that the vehicle cable be connected to an unswitched
outlet on the vehicle’s fuse box. This connection method reduces the
chance of interference from the vehicle’s charging system.
Figure 7-8 Proper Connection of the Vehicle Cable
