Table of Contents vii
2325A137REFGD Revision B 2325 Reference Guide
Illustrations
Figure 2-1 Rotating the Laser Module ................................................................................ 2-1
Figure 2-2 Location of the Hardware Reset Mechanism..................................................... 2-5
Figure 2-3 Removing the PC Card Slot Cover.................................................................... 2-6
Figure 2-4 Typical PC Card................................................................................................ 2-7
Figure 2-5 Inserting a PC Card ........................................................................................... 2-7
Figure 2-6 Radio Card Antenna Connector......................................................................... 2-9
Figure 2-7 Radio Card Antenna Ports................................................................................. 2-9
Figure 2-8 Removing a PC Card....................................................................................... 2-10
Figure 2-9 The Serial Port................................................................................................. 2-11
Figure 2-10 Port for Tethered Scanner.............................................................................. 2-11
Figure 2-11 Antenna ......................................................................................................... 2-12
Figure 2-12 XFER Options (Xmodem Protocol) .............................................................. 2-16
Figure 3-1 CONFIG.SYS File on Drive A.......................................................................... 3-3
Figure 3-2 AUTOEXEC.BAT File on Drive A .................................................................. 3-4
Figure 3-3 CONFIG.SAF File on Drive A.......................................................................... 3-4
Figure 3-4 CONFIG.SYS File on Drive B.......................................................................... 3-6
Figure 3-5 AUTOEXEC.BAT File on Drive B................................................................... 3-7
Figure 3-6 CONFIG.SAF File on Drive B.......................................................................... 3-7
Figure 3-7 CONFIG.SYS File on Drive C for Default Configuration .............................. 3-11
Figure 3-8 AUTOEXEC.BAT File on Drive C for Default Configuration....................... 3-12
Figure 3-9 CONFIG.SYS File on Drive C for I/O PC Card Support................................ 3-13
Figure 3-10 AUTOEXEC.BAT File on Drive C for I/O Card Support ............................ 3-13
Figure 4-1 Configuration Utility Main Menu...................................................................... 4-7
Figure 4-2 Example - The Important Dialog Box ............................................................... 4-9
Figure 4-3 Example - The Open Dialog Box for Selecting a Configuration File.............. 4-10
Figure 4-4 Example - The Open Dialog Box for Selecting a Program Settings File......... 4-11
Figure 4-5 Example - The Custom Configuration Menu................................................... 4-12
Figure 4-6 The Prompt for Saving Changes to the Current File Configuration................. 4-13
Figure 4-7 The Prompt for Saving Changes to the Current Program Settings................... 4-14
Figure 4-8 Example - The First File Configuration Window............................................ 4-15
Figure 4-9 The File Selection Dialog Box for Adding an Application File ...................... 4-16
Figure 4-10 The Edit File Properties Dialog Box for an Application File........................ 4-18
Figure 4-11 Example - The Second File Configuration Window...................................... 4-19
Figure 4-12 Example - The Select DOS Files Dialog Box................................................ 4-21
Figure 4-13 Example - The Third File Configuration Window......................................... 4-23
Figure 4-14 Example - The First Program Settings Window............................................ 4-27
Figure 4-15 Example - The Second Program Settings Window........................................ 4-28
Figure 4-16 Example - The Third Program Settings Window .......................................... 4-29
Figure 4-17 Example - The Fourth Program Settings Window......................................... 4-30
Figure 4-18 Example - The Fifth Program Settings Window............................................ 4-31
Figure 4-19 Example - The Last Program Settings Window............................................. 4-32
Figure 4-20 The Comm Settings Dialog Box.................................................................... 4-33
Figure 4-21 The File Transfer Window ............................................................................ 4-34
Figure 4-22 The Prompt for Saving Changes to the Current File List............................... 4-35
