7-16 Vehicle Mounted DC Single Dock
2325 Reference Guide Revision B 2325A137REFGD
Using the DC Single Dock
Note: The Power LED on the dock is illuminated when the dock is
receiving DC power. Batteries in the 2325 will not charge
unless the Power LED is on.
Figure 7-6 Insert 2325 in DC Single Dock
Note: LXE recommends the 2325 be inserted in the dock after the DC
Dock is securely mounted to a vehicle.
1. Place the 2325 in the DC dock with the keypad facing out (on the
same side as the indicators).
2. Push the 2325 down into the well and release. The handstrap hook
will connect with the upper tab, securing the 2325 in the dock. (See
arrow in figure titled "Insert 2325 in DC Single Dock.")
The dock will begin charging the batteries. The 2325 can begin
communicating with another serial device, such as a printer or modem.
