A SERVICE OF

logo

Open as PDF
next previous
7-8 The Four Slot Dock
2325 Reference Guide Revision B 2325A137REFGD
Creating a Dock Network
The following figure shows the back of two docks in a network. The
dock on the left is connected to a third dock (which may be connected to
another dock). The dock on the right is connected to the host computer
with an RS-232 cable. (To use an RS-422/485 connection to the host,
you would use the telephone-style jack at the far right. The RS-232
connector would not be used.)
Each 4-Slot Dock unit in the network must be connected to a power
supply.
Figure 7-4 Connections for 4-Slot Docks in a Network
1 dock-to-host cable
2 power-adapter
3 dock-to-dock cable