2-6 Using PC Cards
2325 Reference Guide Revision B 2325A137REFGD
Using PC Cards
The 2325 has a slot for plugging in PC cards, and each unit is factory-
equipped with PhoenixCARD Manager Plus PC card drivers. PC cards
provide such features as network connectivity, modem connectivity, and
wireless capability. Their primary purpose in the 2325 is to provide
additional memory storage by functioning as a disk drive.
The 2325 holds one PC card at a time. If the 2325 has a radio card
installed, the radio card will need to be removed before a different PC
card can be inserted.
Opening the PC Card Slot Cover
Figure 2-3 Removing the PC Card Slot Cover
1 Hand strap hook (hand strap not shown)
2 Locking screw
3 Round release button
4 Remove cover
The PC card slot is located near the bottom on the back of the 2325. The
slot is protected by a cover.
Detach the elastic hand strap on the back of the 2325 by pulling its hook
out of the holder near the base. If the slot cover is secured by a screw,
loosen the screw. The locking screw is designed to remain connected to
the 2325.
