Filter
Top Products
36 K400 Issue No. 1
• % of Reading
This selection gives an error calculation referenced to a previously set, specific
measuring point of the temperature span.
The screen shows, in the top part, the selected RTD type, the probe measure
directly in the selected temperature unit and the error value.
The bottom part of the screen shows, the generated temperature value (with
internal or external reference), the temperature set-point, the status arrows symbols
and the selected generation mode.
Pt-100
RDG: °C
0,15% RDG
148.50
150.00 DIRECT
BLK
°C
148.00