Filter
Top Products
12 K400 Issue No. 1
•+/- key
6 Pressing this key changes the sign on working screen. Pressing this key
after the # key, recalls the Switch Test function. Pressing # and +/- again to
return to the working screen.
• key
7 Pressing this key sets the decimal point. Pressing this key after the # key,
recalls the step generation mode, starting from the step selection screen.
•0 key
8 Pressing this key zeroes the display. Pressing this key after the # key, recalls
the ramp generation mode, starting from the Ramp set-up screen.
•1- 9 (numeric) keys
9 Using these numeric keys sets a temperature value or a special generation
mode (ramp limits, programmable steps etc.). Pressing keys 1- 5 after the #
key, recalls specific preset values.
• (arrow) keys
10 Pressing these keys moves the screen cursor either in the horizontal or
vertical direction. When the ramp and step functions are enabled, these keys
can start, stop, hold or recall related values.