Filter
Top Products
K400 Issue No. 1 35
Using the keys, select the required method and press ent.
• Absolute
The display shows the error calculation as deviation in temperature measurement
units between the reference temperature (internal or external) and the unit under
test measurement.
•% of Span
This selection gives an error calculation referenced to the full-scale value.
The screen shows, in the top part, the selected RTD type, the probe measure
directly in the selected temperature unit and the error value.
The bottom part of the screen shows, the generated temperature value (with
internal or external reference), the temperature set-point, the status arrows symbols
and the selected generation mode.
ERROR
ABSOLUTE
% OF SPAN
% OF RDG
Pt-100
RDG: °C
0,15% SPAN
148.50
150.00 DIRECT
BLK
°C
148.00