Filter
Top Products
K400 Issue No. 1 ii
TRACEABILITY AND CALIBRATION REPORT
• Each DBC instrument is supplied as standard with a calibration report,
declaring traceability to a National or International standard.
WARRANTY AND LIABILITY
1 Our equipment is guaranteed against defective material and
workmanship during the warranty period. Claims under warranty
can be made by returning the equipment, prepaid, to our factory. The
equipment will be replaced, repaired or adjusted at our discretion.
2 The liability of GE is restricted to that given under our warranty. No
responsibility is accepted for damage, loss or other expense
incurred through the sale or use of our equipment.
3 Under no circumstances will GE be liable for any special incidental
or consequential damage.
Symbols
The following symbols are used to identify hazards on the instrument:
This symbol, on the instrument, indicates that the user
should refer to the user manual.
This symbol, on the instrument, indicates a very hot
surface that must not be touched.