Filter
Top Products
K400 Issue No. 1 5
• When testing a probe with a certified reference probe, place both probes close
together and at the same depth.
* dimension should comply with EA-10/13 guidelines - for temperature
ranges -80° C to +660°C maximum 0.5mm
IMPORTANT NOTE
Reduction inserts with special holes could be necessary when carrying out a
calibration procedure on temperature device with specific mechanical
dimensions. Refer to GE for details of specific application solutions.
NO
NO
YES
Reduction
insert
Calibration
zone
Internal reference probe
160mm
50
mm
YES
NO YES
*