4 - 12
Parts
LED head
Image drum unit Drum counter reset (Refer to the user's manual for details.)
LED head drive time
Required Adjustment
Control P.C.B. Upload/Download EEPROM data
The last 3 digits indicates the
luminous energy of the LED head.
Luminous energy indications
070
|
314
4.3 Adjustment When Replacing a Part
4.3.1 Adjustment at the Time of Part Replacement (OKIPAGE6e: 300dpi LED head)
The following table lists parts that require adjustment after replacement.
1 LED head drive time setting
Caution:
Do not change the LED head drive time when the luminous energy indicated on
the new LED head is the same as that of the old LED head.
The LED head drive time is set in the LED Head Marking No. on the Engine Menu of the
Maintenance Utility. Input the value printed on the serial No. label on the LED head. The
last 3 digits indicates the luminous energy of the LED head. (See Fig. 4-2.)
• LED head luminous energy
