6 - 6
Category
Controller errors Second Tray Timeout
Error
I/F timeout occured between the
Main Control Board and the 2nd
Tray.
Check the 2nd tray for proper
connection.
PC display status message Trouble or status Remedy
Multipurpose Feeder
Timeout Error
Watch Dog Timeout Error
Cover Open
Paper Input Jam
Cover Open
Jam errors A jam occured during paper hopping
from the tray being displayed.
Tray: Tray1, Tray2, Feeder
– Check the paper in the cassette.
Open and then close the cover.
When the cover is closed,
recovery printing is carried out
and the error display is released.
– If this error occurs frequently,
see 6.5.2 2-1.
The upper cover was opened. – Check the cover to release the
error display.
– If the display does not change
after this procedure, replace the
power supply board.
A watch dog timeout occured. – Turn the power off, then back on
to recover from the error.
– Replace the Main Control PCB.
When replacing the Main Control
PCB, upload/download the
EEPROM data. (Refer to
4.3.1-4.)
I/F timeout occured between the
Main Control Board and the multi
feeder.
Check the multi feeder for proper
connection.
Table 6-1 (Cont'd)
