C - 2
After the end
of processing
Writing into the EEPROM is carried out
after pressing the Enter key, then
On-line or Recover key.
After the end
of processing
Writing into the EEPROM is carried out
after pressing the Enter key, then
On-line or Recover key.
(Range of Adjustment: +2.00mm to
-2.00mm; 0.25mm steps)
Writing into the EEPROM is carried out
after pressing the Enter key, then
On-line or Recover key.
(Range of Adjustment: +2.00mm to
-2.00mm; 0.25mm steps)
ON-LINE
HP4
ON-LINE
HP4
DRUM CNT
RESET'NG
ON-LINE
HEX DUMP
OP MENU
DISABLE
MENU
RESET'NG
LCD display
Press the
Menu key.
Press the
Menu key
Press the
Menu key.
Press the
Enter key.
Press the
Enter key.
Press the
Enter key.
Press the
+ or - key.
Press the
Menu key.
X ADJUST
+0.25mm
Press the
+ or - key.
Press the
Menu key.
Y ADJUST
+0.25mm
Press the
+ or - key.
Press the
Menu key.
Press the
Menu key.
OL 610e
ON-LINE
Adobe PS
or
ON-LINE
Adobe PS
or
USER MNT
HEX DUMP
DRUM CNT
RESET
OP MENU
ENABLE *
MENU
RESET
X ADJUST
0mm*
Y ADJUST
0mm*
(4) X-Adjust / Y-Adjust
• This function sets the first character printing position on the first line.
• The operation mode starts automatically upon completion of resetting.
(5) Operator Panel Menu Disable
• This function is for enabling and disabling of the operation panel menu functions (Menu
1, Menu 2, Tray Select, Copies and Paper Size).
