A SERVICE OF

logo

F - 12
8
7
5
6
2
3
4
1
3.3.3 Hopping Roller Shaft Assembly and One-way Clutch Gear
(1) Open the front cover 1.
(2) Remove the 2 screws 2, and remove the hopping roller frame 3 (be careful not to lose the
Springs 4 when you do this, since it comes off).
(3) Remove the One-way clutch gear 5.
(4) Remove the bush-A 6, and remove the hopping roller shaft assembly 7 (be careful not to
lose the bush-B 8 when you do this, since it comes off).