A SERVICE OF

logo

6 - 11
Category
Controller errors
ERROR 0n
aaaaaaaa
An error occurred in the controller.
n = Exception Code
aaaaaaa = Error Address
Normal operation cannot be
ensured. Turn the power off,
then back on to restart.
If normal operation is not
recovered by this restart
procedure, replace the Main
Control PCB.
LCD status message Trouble or status Remedy
An error occurred in the controller. Turn the power off, then back
on to recover from the error.
If the normal operation is not
recovered by this restart
procedure, use the following
remedial actions.
ERROR nn
Table 6-2