A SERVICE OF

logo

F - 10
3.3.1 Pulse Motor (Hopping)
(1) Turn the printer power switch off “O” and remove the interface cable.
(2) Remove the paper casette 1.
(3) Open the Front cover 2, stand the High Capacity Second Paper Feeder vertically and
remove the 2 E-clamps 3.
(4) Remove the 2 levers 4, and remove the tension springs 5.
(5) Pull out the sheet guide 6 to the front.
(6) Remove the 6 screws 7, and remove the front support plate 8.
(7) Remove the connector 9 and the 2 screws 0, and remove the pulse motor A.
7
8
7
9
0
A
6
2
1
3
5
4