A SERVICE OF

logo

Open as PDF
next previous
3 - 16
3.3.10 Stacker Cover Assy
(1) Remove the upper cover (see 3.3.1).
(2) Remove the motor assy (see 3.3.8).
(3) Remove the reset lever R 1.
(4) Detach the reset spring 2 from the lower base unit 3, turn the reset level L 4 in the direction
of the arrow
A
until it stops, and remove it in the direction of the arrow
B
.
(5) Release two pins of the lower base unit 3, then remove the stacker cover assy 5.
5
1
3
2
4
B
A
C
A