A SERVICE OF

logo

3 - 13
3.3.7 Lower Base Unit
(1) Remove the upper cover (see 3.3.1).
(2) Remove the connecting cables 4 and 5 of the pulse motor from the connectors 2 and 3
of the Main Control PCB 1.
(3) Remove the connector 6 of the LED head from the Main Control PCB 1.
(OKIPAGE 6e: 1 connector, OKIPAGE 6ex: 2 connectors)
(4) Remove seven screws 7, then remove the lower base unit 8.
7
7
7
8
6
5
4
7
2
3
1