6 - 17
Category
Buffer overflow
REC BUFF
OVERFLOW
LCD status message Trouble or status Remedy
The receive buffer is overflowing. – Press the operator panel
RECOVER key to release the
error display.
– Change the setting of the host
or printer so the host can detect
the busy status of the printer.
Resend the data from the host
to the printer.
– Replace the interface cable or
control board.
(for OKIPAGE 6ex, in
HP 4 mode)
PAGE BUF
OVERFLOW
The page buffer is overflowing
because it received too much data
for printing on the page.
– Press the operator panel
RECOVER key to release the
error display.
– Install additional optional RAM
board or reduce the print data.
(for OKIPAGE 6ex, in
HP 4 mode)
DLL BUFF
OVERFLOW
The DLL buffer is overflowing. – Press the operator panel
RECOVER key to release the
error display.
– Install additional optional RAM
board or reduce the DLL data.
(for OKIPAGE 6ex, in
HP 4 mode)
MACRO
OVERFLOW
Macro buffer is overflowing. – Press the operator panel
RECOVER key to release the
error display.
– Install additional optional RAM
board or reduce the macros.
PRINT
OVERRUN
The printer overrun because the
print data is too complicated to be
printed.
– Press the operator panel
RECOVER key to release the
error display.
– Simplify page data formatting.
(for OKIPAGE 6ex, in
HP 4 mode)
Table 6-2 (Cont'd)
