A SERVICE OF

logo

Open as PDF
next previous
3 - 19
3.3.13 Fusing Unit Assy
(1) Remove the upper cover (see 3.3.1).
(2) Remove the lower base unit (see 3.3.7).
(3) Remove the stacker cover assy (see 3.3.10).
(4) Remove four screws 1 and remove the fusing unit 2.
Caution:
Fusing unit assy may be hot. Use care when handling.
Note:
When installing or removing the fusing unit assy, tighten or loosen the screws while
holding the fusing unit down with your hand.
1
2