A SERVICE OF

logo

Programs 79
E-EQ-MX6RG-E-ARC MX6 Reference Guide
WPA Settings tab
Factory Default Settings
WPA Settings
WPA Mode Disabled
PSK pass-phrase Blank
Figure 4-13 WPA Settings tab
WPA Mode This drop-down list contains the following options:
• Disabled - Do not enable WPA mode. This is the default selection.
• WPA 802.1x - Enable WPA and obtain key information through the
802.1x protocol.
• WPA PSK - Enable WPA with Pre-Shared Key (PSK) information
entered in the field below.
This mode is used if the 802.1x protocol is not being used for
authentication.
PSK pass-phrase This field activates if you select WPA PSK in the WPA Mode drop-
down list.
Enter between 8 and 63 characters for your pass phrase. Asterisks
appear as you type for increased security.