MX6 Utilities 85
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Hotkeys
Access: (Version 7.03 and 7.11) Start | Utils | Hotkeys
(Version 7.13) Start | Power Tools | Hotkeys
Activates button assignments. Hotkeys are created using the Button applet. Tap the Hotkey icon to
initialize the hotkey Button settings. Tap the icon again and select Yes to turn it off.
See Also: Start | Settings | Personal | Buttons.
IPConfig
Access: (All Versions) Start | Programs | Utils | IPConfig
(Version 7.03 and 7.11) Start | Utils | IPConfig
(Version 7.13) Start | Power Tools | Network Utilities | IPConfig
Factory Default Settings
Input
Adapter nnnnnn Pegas1
Output
Display Blank
About
Ipconfig Copyright
Figure 4-16 Utility Program – IP Config
Allows you to manually review and configure current Internet Protocol (IP) configurations.
Online help is not available for this menu option. Tap X to close this window.
Adapter This drop-down list contains the network adaptors currently installed.
All fields and buttons on this screen pertain to the adapter selected in
this drop-down list.
Release the IP
address button
Pressing this button changes the MAC address, sets the IP address to
0.0.0.0 and sets the Subnet mask to 0.0.0.0 as well as clearing out the
Gateway data.
Renew the IP
address button
Pressing this button renews the MAC address, IP address, Subnet Mask
and Gateway data.
Display full
configuration button
Pressing this button displays the Windows IP configuration for the
802.11 card and adapter in the Output window.
The Output window automatically opens when the Display full configuration button is tapped.
The About tab displays description and version information about IPConfig.
