188 Power Tools EZConfig Utilities
MX6 Reference Guide E-EQ-MX6RG-E-ARC
System Section
The System section contains child sections that configure various system settings. For specifics on
each sections and their keys, refer to the Description sections in the DeviceConfig.EXM file itself.
Welcome Screen Section
The Welcome Screen section allows you to bypass the Windows Mobile startup screens after each
cold boot. These screens are the standard windows that walk you through using the stylus and pop-
up menus; for example:
Key Description Available Values
NoWelcome This is a special key that bypasses the
Windows Mobile startup screens.
Default value: 0
0=Disabled; the Pocket PC screens
appear after each hard reset.
1=Enabled; the Pocket PC screens do not
appear after each hard reset.
Launching DeviceConfig.exe
Because the settings in the User Interface section alter the AutoInstall process, DeviceConfig.exe
must be launched manually after the DeviceConfig.EXM file is changed. DeviceConfig.exe
processes the DeviceConfig.EXM file and applies the NoWelcome setting before the next hard
reset.
If DeviceConfig.exe is not launched manually prior to the next hard reset, the No Welcome setting
is not applied and the Welcome screens appear during the next startup. Then, when Autorun
launches DeviceConfig.exe during startup, the NoWelcome setting is applied and the Welcome
screens are removed from the next hard reset.
Autorun.ini
When the NoWelcome key is applied by DeviceConfig.exe, a small Autorun.ini file is created in
the \IPSM folder. This .ini file contains the NoWelcome information. Do not remove this created
file!
Applications Section
The Applications section configures specific software applications installed on the mobile device.
MSM Section
The keys in this section configure the MSM agent. Disable this section if there is no MSM agent
on the mobile device.
Key Description Available Values
ServerAddress
Primary
The IP address of the primary server.
Default value: N/A
IP address
ServerAddress
Secondary
The IP address of the secondary server.
Default value: N/A
IP address
PortNumber The port number of the primary server.
Default value: N/A
Port number
