66 Programs
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Meetinghouse AEGIS Client
Access: Start | Programs | Meetinghouse AEGIS Client icon
Note: When the Client is running, tap the Meetinghouse icon in the toolbar to make changes.
Use this menu option to set LEAP parameters for the 802.11 radio connection.
There are three menu options in the toolbar: Client, View and Help.
Select Client | Configure to make changes to the client configuration.
When configuration changes have been made, a message “Please restart client in order for
configuration changes to take effect” is displayed on the screen. Tap OK to acknowledge the
message then tap Start | Utils (or Power Tools) | Reboot | Warm Boot to restart your device.
See Also: Chapter 7 “Wireless Network Configuration”.
AEGIS Client Icon Indicator
The color of the icon indicates the status of the controlled ports.
Icon Color This color icon indicates that …
Green Authentication succeeded.
Yellow Authentication is in process.
Red Authentication failed.
If there is no yellow, red or green in the icon then either the ports are not being controlled by
802.1X, or there is no authentication activity on the controlled ports. The absence of yellow,
red or green may also indicate that the network access server is not an 802.1X aware device.
Gray
The port is not in use or is disabled.
Either the Client isn’t running, or the port is not bound to the 802.1X
protocol.
Orange
The port is associated, but there is no response to 802.11b packets.
If using WEP without 802.1x authentication, this will be the final state
when the connection is complete. If using 802.1x authentication, it is
either a transient condition or can indicate that attempts to authenticate
have timed out as there was no response to 802.1X packets.
Blue
There is no 802.11b activity. The port may not be connected to an
802.1X-aware entity.
To use the client, a port must be configured and enabled. A protocol must be configured and
started. These are separate operations. Please see your network system administrator to obtain the
information necessary to configure the AEGIS client in order to provide network access.
