38 COM Ports
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Integrated Imager or Scanner
The MX6 has an integrated imager or an integrated laser scanner. The type of laser scanner engine
is documented on the label inside the battery well. When there is no laser scanner engine listed,
the MX6 has an integrated imager. Please refer to the “MX6 User’s Guide” for instruction.
Can be decoded by … Can be decoded by …
Barcode
Symbology
Imager Scanner
Barcode
Symbology
Imager Scanner
Auspost x Int25 x x
Aztec x ISBT x x
BPO x JapanPost x
Canpost x Maxicode x
Codabar x x Mesa x
Codablock x MicroPDF x
Code11 x x MSI x x
Code128 x x OCR x
Code39 x x PDF417 x
Code49 x Planet x
Code93 x x Postnet x
Composite x QR x
DataMatrix x RSS x x
DutchPost x TLC x
EAN13 x x UPCA x x
EAN8 x x UPCE0 x x
IATA25 x x UPCE1 x x
Figure 3-5 Barcode Symbologies – Imager and Laser Scanner
Note: Please contact your LXE representative for availability of barcode symbologies not
included in this list.
The Imager
The MX6 Imager can be used to collect barcode data from any nearby compatible barcode label.
Depending on the type of imager engine installed, size of the barcode, size of bars and spacing
and quality of the barcode, the imager reads barcodes between 2.5 to 12.5 in. / 6.3 to 32 cm.
The integrated imager scans only when the Scan button is pressed or the scan trigger on the
optional handle is pressed. The Scan LED illuminates during any integrated imager activation.
