Configuring an MX6 Radio for WPA 269
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Figure 7-10 Server Certificate
1. Uncheck the Do not validate server certificate chain box.
2. The Certificate issuer must be listed in the list box. This is the certificate that was added
previously in section titled “Install Certificates on the MX6”.
3. Server name must be – type the common name of the RADIUS server certificate exactly
using upper and lower case as needed. This is the name of the certificate that was added
previously in section titled “Install Certificates on the MX6”.
4. Tap the radio button for Must match exactly.
5. Tap the OK box at the bottom of the screen.
6. Soft reset (reboot) the MX6.
7. The MX6 will authenticate WPA, validating the server certificate first.
WPA using PEAP/MS-CHAP has been configured, authenticated and validated.
