142 Settings Options
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Config Tab
Access: Start | Settings | Connections tab | 802.11b Settings | Config tab
Figure 4-59 Config Tab
The Config tab provides a list of all access points and peer stations in range of the MX6 radio.
This configuration tool is used to create and edit SSID profiles for access points that the user
wants their station to associate with.
Note: See the section titled “Creating and Modifying Profiles” for instruction.
Operation Buttons
Apply
Tap the Apply button to associate a station with the selected SSID. This SSID can be
either from the Preferred Profile table or from the Active SSID’s list.
When applied, the Status tab window displays the status of the wireless connection.
If the association failed, a search for another AP in the Preferred Profile list
automatically takes place and the radio attempts to associate with the station, in
order of preference.
Refresh
Tap the Refresh button to start a new search for all available access points or peer
stations in the vicinity.
Add
Add an Active SSID profile to the Preferred Profile table.
1. Select and highlight an SSID in the Active SSID list.
2. Tap Add. If the SSID has WEP Key-On, the Settings window displays and
prompts the user to enter the WEP Method, Encryption Key, and Key ID.
3. Tap OK in the Settings window after finishing the configuration. The SSID and its
profile are added into the Preferred Profiles window.
If adding an SSID with WEP Key Off, the Settings window does not display and the
SSID is added directly to the Preferred Profile table when the Add button is tapped.
