170 Power Tools EZConfig Utilities
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Moving Keys
To move keys within a configuration file, use the drag and drop method. Highlight the key, then
press and hold the CTRL key to drag and drop a copy of the key to the new location.
To move keys between configuration files, open two instances of EZConfig Editor and drag and
drop keys between them. When you select the key and drag, a copy of the key is dragged to the
new file. In the new file, drop the key in the key area of a selected section; keys are always
dropped at the same level within a section.
Tools Menu
Figure 4-82 EZConfig Tools Menu
Menu Item This menu item…
Launch Associated
Application
If the open configuration file is associated with an application on the
mobile device, this item is active and launches the associated
application on the device.
Associate an Application using File | Properties.
Simplify Document
Note: You cannot
undo this action!
Simplifies the configuration file, which permanently removes Disabled
sections and keys, Descriptions, and Barcode settings.
Simplifying makes configuration files smaller. When you create a
barcode, you can simplify the file embedded in the barcode without
affecting the open configuration file. This reduces the size of the
barcode package yet keeps the disabled sections, descriptions, and
barcode settings in the open configuration file for future reference.
Note: This option is disabled on the MX6.
Warm Boot * Warm boots the mobile device.
Cold Boot * Cold boots the mobile device.
