E-EQ-MX6RG-E-ARC MX6 Reference Guide
Chapter 4 System Configuration
Introduction
There are several different aspects to the setup and configuration of the MX6. Many of the setup
and configuration settings are dependent upon the optional features such as hardware and software
installed on the unit. The examples found in this chapter are to be used as examples only, the
configuration of your specific MX6 computer may vary. The following sections provide a general
reference for the configuration of the MX6 and some of it’s optional features.
Note: When a new battery is installed in the MX6 for the first time (and when both batteries
have been completely depleted), the Time and Date must be re-set.
Windows for Pocket PC
Access: Start | Settings | System tab | About
For general use instruction, please refer to commercially available Windows Mobile user's
guides or the Windows Mobile on-line Help application installed in the MX6.
This chapter's contents assumes the system administrator is familiar with Microsoft Windows
options and capabilities loaded on most standard Pocket PC devices and/or desktop computers.
Therefore, the sections that follow describe only those Windows capabilities that are
unique to the LXE MX6 and it's Windows Mobile environment.
Installed Software
Note: Some standard Windows Mobile options require an internal or external modem
connection. Modems are not available from LXE nor supported by LXE.
When you order an MX6 you receive the software files required by the separate programs needed
for operation and wireless communication. The files are loaded by LXE and stored in
subdirectories in flash memory (or RAM).
This section lists the contents of the subfolders and the general function of the files. Files installed
in each MX6 are specific to the intended function and the operating system version of the MX6.
LXE recommends connecting the MX6 to an external power supply, placing it in suspend mode
and recharging the main battery when the mobile device is not in use.
View System Information
Access: (Version 7.03) Start | Utils | SysInfo
(Version 7.11) Start | Utils | SysInfo
(Version 7.13) Start | Power Tools | SysInfo
Use these menu options to determine registry settings for System Time, System Information
(Hardware Revision, Kernel, Service Pack, Boot Loader Version, etc), DLL Version Information,
System Parameters, Network and Radio Information, Files stored in the IPSM folder, Files
automatically installed, Power status, Storage space used and available, System version
information and Global Memory settings.
