AppLock Error Messages 239
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Message Explanation and/or corrective action Level
Timeout looking for app window After the application is launched, AppLock must wait
until the application has initialized itself before
proceeding. The application did not start successfully
and AppLock has timed out.
LOG_ERROR
ToUser after admin, not at boot The user mode switch is attempted when the device
boots and after the administrator presses the hotkey. The
mode switch is being attempted after a hotkey press.
LOG_EX
ToUser after admin-app still open The switch to user mode is being made via a hotkey
press and the administrator has left the application open
and has not made any changes in the configuration.
LOG_EX
ToUser after admin-no app or cmd
line change
If user mode is being entered via a hotkey press, the
administrator may have left the configured application
open. If so, AppLock does not launch the application
again unless a new application or command line has
been specified; otherwise, it just locks it.
LOG_EX
Unable to move desktop The desktop is moved when switching into user mode.
This prevents them from being visible if the application
is exited and restarted by the timer. This error does not
affect the screen mode switch; processing continues.
LOG_ERROR
Unable to move taskbar The taskbar is moved when switching into user mode.
This prevents them from being visible if the application
is exited and restarted by the timer. This error does not
affect the screen mode switch; processing continues.
LOG_ERROR
Unhook taskbar wndproc failure AppLock could not remove its control of the taskbar.
This error does not affect AppLock processing
LOG_ERROR
Unhook wndproc failure AppLock could not remove the hook that allows
monitoring of the application.
LOG_ERROR
Unhooking taskbar In administration mode, the taskbar should return to
normal operation, so AppLock’s control of the taskbar
should be removed.
LOG_EX
Unhooking wndproc When the administrator leaves user mode, the device is
fully operational; therefore, AppLock must stop
monitoring the locked application.
LOG_EX
WM_SIZE adjusted This message denotes that AppLock has readjusted the
window size.
LOG_EX
X after Ctrl+L Processing the backdoor entry. LOG_EX
Ret from password <#> Return value from password dialog. LOG_EX
Decrypt data len <#> Length of decrypted password. LOG_EX
Window handle to
enumwindows=%x
The window handle that is passed to the enumeration
function. This message can be used by engineering with
other development tools to trouble shoot application
lock failures.
LOG_EX
WM_WINDOWPOSCHG
adjusted=%x
Output the window size after it has been adjusted by
AppLock
LOG_EX
