Enter Data 25
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Enter Data
You can enter data into the MX6 through several different methods. The Scanner aperture
provides barcode data entry, the combination USB/RS-232 or the IR port are used to input/output
data, and the keypad provides text entry using the keypad.
MX6's with a touch screen use a stylus to input data, the COM ports and/or the keypad. A virtual
keyboard is available in applications that expect keyed input.
Keypad Entry
The keypad is used to manually input data that is not collected otherwise. Almost any function that
a full sized computer keyboard can provide is duplicated on the keypad but it may take a few more
keystrokes to accomplish a keyed task.
Almost every key has two or three different functions. The primary alpha or numeric character is
printed on the key.
The Red or Blue keys are pressed when you want to use a 2
nd
key function. For example, when
you press a Blue or Red key (the 2
nd
key), then press the key that has the desired second-function
key. The specific 2
nd
character is printed above the corresponding key in either Red or Blue.
Please refer to “Appendix A - Key Maps” for instruction on the specific keypresses to access all
keypad functions.
Stylus Data Entry
Note: Always use the point of the stylus for tapping or making strokes on the display. Never use
an actual pen, pencil or sharp object to write on the touch screen.
The stylus performs the same function as the mouse that is used to point to and tap elements on a
desk top computer. The stylus is used in the same manner as a mouse – single tap or double tap to
select menu options, drag the stylus across text to select, hold the stylus down to activate slider
bars, etcetera.
Hold the stylus as if it were a pen or pencil. Touch an element on the screen with the tip of the
stylus then remove the stylus from the screen. The touch screen responds to an actuation force
(touch) of 4 oz. (or greater) of pressure.
The stylus can be used in conjunction with the keyboard, integrated imager and an input/output
device connected to one of the MX6's serial ports.
• Touch the stylus to the field of the data entry form to receive the next data feed.
• The cursor begins to flash in the field.
• The unit is ready to accept data from either the physical keypad, virtual keyboard, or
integrated imager.
