Programs 63
E-EQ-MX6RG-E-ARC MX6 Reference Guide
and you didn’t have to type a word. Simply disconnect your device from your computer and
you’re ready to go!
For more information about using ActiveSync on your desktop computer, open ActiveSync, then
open ActiveSync Help and you can also tap Start | Programs | Help and view the help topic for this
option.
Synchronizing from the MX6
You must have set up ActiveSync on your desktop computer and completed the first
synchronization process before you initiate synchronization from your device using a connection
process other than USB or serial.
To initiate synchronization from your device, tap Start, then ActiveSync to begin the process.
Note: If you have a wireless LAN card, you can synchronize remotely from your device.
Tap to connect and synchronize.
View synchronization status.
Tap to synchronize via IR or change synchronization settings.
View connection status.
Tap to stop synchronization.
Tap Start | Help for context-sensitive help.
Avalanche (Optional)
WaveLink Avalanche Enabler
Enabler files are installed upon initial bootup and after a hard reset. The designation of the mobile
device to the Avalanche CE Manager is LXE_MX6. The following features are supported by this
enabler when used in conjunction with the Avalanche Manager.
Network parameter configuration is supported for:
• IP address: DHCP or static IP
• RF network SSID
• DNS hosts (primary, secondary, tertiary)
• Subnet mask
• Enabler update
Configuration change or software download is not supported in this version. Contact your LXE
representative to check for release dates for these functions.
See Also: “WaveLink Avalanche for WIN OS User’s Guide”.
