72 Programs
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Server tab
Information used to verify a server certificate in TOS, TTLS or PEAP. The default is “Not Used”.
Use the parameters on this screen when debugging or assigning server certificates.
Figure 4-8 Client Configuration – Server tab
Do not validate server
certificate chain
If enabled, the server certificate will not be validated. For
debugging only.
Certificate issuer must be
Select the CA which signed the server certificate, or "Any
Trusted CA".
Allow intermediate certificates
Allow unspecified certificates to be in the server certificate
chain between the server certificate and the specified
“Certificate issuer”.
Server name must be
The server name, or a domain to which the server belongs,
depending on which of the two fields below has been
checked. This will be compared to the server certificate's
Subject: CN field.
Server name must match
exactly
When selected, the server name entered must match exactly
the server name found on the certificate.
Domain name must end in
specified name
When selected, the server name field identifies a domain and
the certificate must have a server name belonging to this
domain or to one of its sub-domains
