
Digital Monitoring Products XR500 Series Canadian Programming Guide
38
menu diSPlay
Menu Display
14.1
MENU DISPLAY
Menu Display
Menu Display allows you to select at which keypad addresses the user can access the
following functions.
Toselectakeypad,enterthedevicenumber(keypadaddress)usingthedigitkeys
onthekeypad.Whenakeypadisselected,anasteriskappearsnexttothekeypad
address.Enterthenumberagaintodeselectthekeypad.PresstheCOMMANDkey
todisplaythenextsetofkeypads(9through16).RefertotheMultipleDisplays
section at the beginning of this document.
14.2
ARMED STATUS:
Armed Status
Enterthekeypadaddresses(1through16)thatshowthearmedareas.TheUser
Menu Armed Areas function also displays the custom area name you enter in Area
Information.
Whenonlyareasonetoeightareused,theArmedStatusdisplayis12345678.
WhenareasnineorhigherareusedthesystemArmedStatusdisplayreadsALL
SYSTEMONorSYSTEMON.PresstheCOMMANDkeytodisplayadditionalareas.
Refer to the Multiple Displays section at the beginning of this document and in the
XR500User’sGuide(LT-0683CAN).
14.3
TIME DISPLAY:
Time
Enter the keypad addresses that can display the time and day of the week.
14.4
ARM/DIS DISPLAY:
Arm/Disarm
Enter the keypad addresses from which users can arm and disarm areas.