Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Description 8
1. DESCRIPTION
WASHER EXTRACTOR DESIGNED TO WASH OR TREAT FABRIC IN A WATER BATH.
1.1. Characteristics
Construction characteristics:
Washers, capable of extracting with speeds above 350G without having to be bolted down. The design of its
suspension system: multi-directional springs and shock absorbers to cushion up to 95% of the vibrations
produced during the spin cycle.
Stainless steel inner and outer drum. The openings in the drum blades promote the uniform distribution of
bath water and improve the yield of the washer both during the wash and the rinse cycles.
The drum rotation is produced by an asynchronous motor of alternating current controlled by inverter.
Hot and cold water connections with a safety mechanism to prevent contaminating by back-flowing into the
general potable water system.
Large capacity drain valve.
Water inlets and all product dispensers done using a common collector with an anti-siphon mechanism.
Option for heating the bath using electric heaters or steam injection.
Functional characteristics
:
Operation control of the washer by microprocessor.
Operation of the washer adaptable to the possibilities of the installation and the needs of the user.
Temperature control mixes hot and cold water in accordance with the programmed temperature and the
activation of the heating system. Precision of +/- 2ºC (+/- 3.5ºF).
Level control done with an electronic pressure transmitter.
Serial communication between the washer microprocessor and the inverter control of the motor. This
communication takes advantage of all the features offered by inverter technology which results in a
significant energy savings and an optimal management of the spin cycle. This in turn implies a significant
reduction in noise, vibration and wear on the washer components.
Washing programs: availability of twenty pre-programmed programs.
Seventy-nine free programs, programmable by the user.
Programming, copying, modifying and erasing menus. These menus are viewed in graphic mode. This type
of viewing facilitates understanding the different operations.
Memory card that allows storing programs from the washing machine memory and later introducing them
into other machines Thanks to its programming system, the programs programmed into a washing machine
with Microprocessor Control are usable in any washing machine with the same control.
Multiple controls that assure the safe use of the washer.
1.2. PROTECTION, SAFETY AND CONTROL ELEMENTS
Fixed guards: Covers. Protect the user from the contact with dangerous points and accidental machine
spattering.
Moving guards:
Dispenser cover.
TILT models. Covers allowing tilting movements of the washer.
Door with interlock microswitch, door lock and delayed opening.
Unbalance microswitch. Additional electromechanical safety to protect against unbalance of drum load
during the spin cycle.
Overflow. When the bath level is exceeded by electrovalve failure, the bath is drained through the drain
outlet
Thermal fuse to protect the electric heaters.