Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Executing programs 18
4.10.2. Using the TILT SYSTEM
Open the washing machine’s door and secure it using the right side hook. If the main menu window is
displayed, go to PROGRAM EXECUTION MODE.
Execute the desired option by pressing the corresponding key from the multi-function keyboard:
Loading position. It tilts the washer backwards. When it reaches the final tilt position, the loading
and unloading functions screen can be accessed.
On the multi-function keyboard, press the key corresponding to the icon to tilt the washer to the
loading position.
Unloading position. It tilts the washer forwards. When it reaches the final tilt position, the loading
and unloading functions screen can be accessed.
On the multi-function keyboard, press the key corresponding to the icon to tilt the washer to the
unloading position.
Loading and unloading functions
Cold water inlet. Only in loading position.
ON: open valve; OFF: close valve (if OFF is not pressed, the valve closes automatically when it
reaches a preset level).
Water inlet A2 (hot and cold water depending on the washer connections.) Only in loading
position.
ON: open valve; OFF: close valve (if OFF is not pressed, the valve closes automatically when it
reaches a preset level).
Right rotation. Press the DRUM ROTATION push-button on the control board to activate the
multi-function keyboard.
On the multi-function keyboard press the key which corresponds to the picture in the screen. The
drum will turn clockwise at low speed.
Left rotation. Press the DRUM ROTATION push-button on the control board to activate the multi-
function keyboard.
On the multi-function keyboard press the key which corresponds to the picture in the screen. The
drum will turn clockwise at low speed.
End of TILT System operation
STOP
The STOP key on the alphanumeric keyboard closes the loading and unloading functions
screen. The return to horizontal position screen is displayed.
If water has been allowed in the loading position, this water will be kept into the washer when a
new cycle is started.
Return to horizontal position.
Press, on the multi-function keyboard, the key corresponding to the icon to tilt washer in
horizontal position. If water has been allowed in the loading position, this water will be kept into
the washer when a new cycle is started.
Close the door. The action of closing the door finishes the loading and unloading state, as well.
This action does not open the drain valve. If water has been allowed in the loading position, this
water will be kept into the washer when a new cycle is started.