Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Executing programs 15
4.7. STOP AND DOOR OPENING MODES
Description of the distinct stop modes of the washing machine.
End of cycle. Stoppage of the washing machine functions after the wash cycle ends. The washing machine
control circuit remains in operation.
Door opening. After the bath has been drained and the drum rotation has ended, the door lock is unblocked
allowing for the opening of the door.
STOP key. Interrupts the wash cycle in operation and opens the drain of the washing machine. The washing
machine control circuit remains in operation.
Door opening. After the bath has been drained and the drum rotation has ended, the door lock is unblocked
allowing for the opening of the door.
NORMAL STOP switch. Switch installed on the front piece of the washing machine. Disconnect the washing
machine control circuit. DOES NOT DISCONNECT the entire electric circuit of the machine.
Door opening:
Models with safety delay by means of thermal device (HS-6013, HS-6017, EH030 and EH040). After a
maximum safety time (at times surpassing 3 minutes), the washing machine lock is unblocked.
Other models: Connect the ON switch again. After a maximum safety time (at times surpassing 3 minutes),
the washing machine lock is unblocked. In NORMAL STOP condition the door is not unblocked.
Emergency stop. Red button with lock located in a visible and accessible place on the washing machine. It
interrupts the operation of the washing machine. Once the switch is unblocked, the wash program resumes
by pressing the PROG key of the multi-function keyboard; the STOP key cancels de program.
Door opening:
Pushing the STOP key and after a maximum safety time (at times surpassing 3 minutes), the washing
machine lock is unblocked.
General stop. General switch located on the rear part of the washing machine. TOTALLY disconnects the
electric supply of the machine. Suitable for maintenance interventions and in situations of prolonged machine
stoppage.
Door opening:
Models with safety delay by means of thermal device (HS-6013, HS-6017, EH030 and EH040). After a
maximum safety time (at times surpassing 3 minutes), the washing machine lock is unblocked.
Other models: In GENERAL STOP condition the door is not unblocked. If the washer's electrical supply can
not be connected, the safety lock will have to be manual unblocked. Refer to chapter 14.
4.8. DELAYED START OF A WASH PROGRAM
Allows the user to program the start time of a wash cycle.
Programming the start time:
Load the washing machine, close the door and select the wash program.
Press the C key on the numerical keyboard. On the screen, the current time will appear. Format of 24 hours.
The ------ ---4--- keys of the multi-function keyboard allow selecting minutes / hours. The value being
selected blinks.
Program the desired starting time on the numerical keyboard and confirm with the START key. The start
time remains on the screen.
The STOP keys or the ------ on the multi-function keyboard cancel the delayed start.