Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Executing programs 20
4.11.2. Using the EASY-LOAD SYSTEM
Open the washing machine door. If the main menu window is displayed, go to PROGRAM EXECUTION
MODE.
Execute the desired option by pressing the corresponding key from the multi-function keyboard:
On the screen the door open icon is displayed.
Press ROT key on the multi-function keyboard to access to the rotation and water inlet functions.
Loading and unloading functions
Cold water inlet. Only in loading position.
ON: open valve; OFF: close valve (if OFF is not pressed, the valve closes automatically when it
reaches a preset level).
Water inlet A2 (hot and cold water depending on the washer connections.) Only in loading
position.
ON: open valve; OFF: close valve (if OFF is not pressed, the valve closes automatically when it
reaches a preset level).
Right rotation. Press the DRUM ROTATION push-button on the control board to activate the
multi-function keyboard.
On the multi-function keyboard press the key which corresponds to the picture in the screen. The
drum will turn clockwise at low speed.
Left rotation. Press the DRUM ROTATION push-button on the control board to activate the multi-
function keyboard.
On the multi-function keyboard press the key which corresponds to the picture in the screen. The
drum will turn anticlockwise at low speed.
End of EASY-LOAD System operation
The STOP key on the alphanumeric keyboard closes the loading and unloading functions
screen.
On the screen the door open icon is displayed
Close the door. The action of closing the door finishes the loading and unloading state, as well.
This action does not open the drain valve. If water has been allowed in the loading position, this
water will be kept into the washer when a new cycle is started.